Search This Supplers Products:High voltage electrical productsVACUUM INTERRUPTERVACUUM CONTACTORVACUUM CIRCUIT BREAKERVCB SWITCHGEAR PANELSUBSTATION
Packging & Delivery
Min Order1 piece
Briefing
Detailed
Description
The current
transformer is used for measuring electric energy and current, relay protection
in the electric systems up to rated frequency 50Hz or 60Hz and rated voltage
0.66kV.
Type I
(square circuit hole) capable of passing through either the cable or the
purpose of monitoring.
Type II(horizontal square hole) capable of passing
through 1-3 bus bar(s) is generally used for the purpose of monitoring.
Type III(vertical square hole) capable of
passing through 1-3 bus bar(s) has the same characteristics of Type I and Type
II, and is also intended to measure the electric energy of power supply
system(Class0.2).It can still be used at larger secondary impedance and act as
the zero-sequence current transformer.
Construction
The iron core is loop type. The secondary winding go uniformity around the core. There has hole for the busbar going through on the nip.
Specification |
Rated
primary/ |
Cut the size(mm2) |
Root NO |
Rated | Accuracy | Tallest work Voltage (V) | Primary |
BH-30 |
15/5 |
2.5 | 1 | 660 | 5 | ||
20/5 | 2.5 | 1 | 660 | 4 | |||
25/5 | 2.5 | 1 | 660 | 3 | |||
30/5 | 2.5 | 1 | 660 | 3 | |||
40/5 | 2.5 | 1 | 660 | 2 | |||
50/5 | 2.5 | 1 | 660 | 2 | |||
60/5 | 2.5 | 1 | 660 | 1 | |||
75/5 |
30×10 |
1 |
2.5 | 1 | 660 | 1 | |
100/5 |
30×10 |
1 |
2.5 | 1 | 660 | 1 | |
150/5 | 30×10 | 1 | 2.5 | 0.5 | 660 | 1 | |
200/5 | 30×10 | 1 | 5 | 0.5 | 660 | 1 | |
250/5 | 30×10 | 1 | 5 | 0.5 | 660 | 1 | |
300/5 | 30×10 | 1 | 5 | 0.5 | 660 | 1 |
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.